As the industry’s Metal Container leader since 1938 Freund Container has your answers for better packaging solutions.
WHY CHOOSE METAL? Metal is one of the most abundant raw materials, offering superior content protection and provides a very low environmental footprint.
Metal Liner Types: C-Enamel liners work great for low acidic foods. For prolonged storing of foods with low acidity, however a discoloration of the metal surface can occur. White Enamel liners are ideal for higher acidic foods, such as beets, berries, tomatoes, etc. Epoxy liners are for most water and latex based solvents and increase chemical stability. Laquer liners are FDA approved and work well for acidic food and aggressive solutions.
Frequently Asked Questions: Heated Metal? Tinplate heat up to 450°F (230°C). Stainless Steel and Carbon can be heated to 2600°F. Rusting Metal? Much of our metal is treated with a rust inhibitor, but not rust preventer. Rust is based on moisture and oxygen and however much exposure a container gets to either one of these post manufacturing is what will determine if any, how much rust you will incur. Testing is recommended with your product.
TERMS AT A GLANCE Bead: concave (interior bead ) or convex (exterior bead ) area usually 1/8″ wide spanning the circumference of the tin to provide additional strength and stability to the tin bodyBody: a can without a cover (lid); the base of a containerCover: a can’s lid or closureCurl: area of tin turned in on itself to provide a safe, finished curved edge Dome: a type of cover characterized by a flat horizontal surface (top) that tapers smoothly onto the skirt (vertical surface)
Drawn: see seamless
End: the area of a tin also known as the bottom. Coffee-style hermetic tins generally have two ends. Ends can be attached by seaming them on or crimping
Full friction: a plug-style metal cap fits snugly to the interior of the can
Hem: similar to a curl, an area of tin turned in on itself to provide a safe, finished flattened edge
Interior Friction: Cover/closure option in which a pliable ring fits to the interior of a tin allowing for a straight-sided slender profile can
Lock-seam: side walls meet and attach by hooking onto one another to form a tin body
Multiple friction: a plug closure fits into a “well” of a seamed-on ring. The plug is pressed into the ring and the two surfaces (the outside and inside edge) come into contact with the ring, creating multiple sealing surfaces on the plug/ring combination
Seamless: a tin that is constructed from a single piece of tin drawn to form the body of the can
Single friction: a plug-style metal cap fits snugly into a seamed on ring. The outside edge of the plug presses against the interior edge of the ring, creating one sealing surface
Slip cover: cover/closure style in which the cover’s skirt (vertical surface) slips over and to the outside of the can body
Stepped cover: type of slip cover in which a “step” is created between the horizontal surface and vertical surface of the cover so that stacking tins is possible with less likelihood of toppling over
Welded Seam: seam type in which side walls attach to one another through the use of heat to form a tin body
White Coat: entire surface of the metal is coated with white before applying other printing ink colors